IM-5分子筛在Ni-Cu催化剂甲烷热裂解制氢反应中的作用研究

甲烷热裂解制氢并生成高附加值的纳米碳材料,被认为是极具发展前景的氢气生产途径,但高性能催化剂的研发仍存在诸多挑战.我们选择多种载体(TS-1、 IM-5、 Y、介孔SiO₂、 γ-Al₂O₃、 CNTs),采用浸渍法制备Ni-Cu负载催化剂,通过低温N2吸附-脱附、 XRD、 SEM和H₂-TPR等系列表征方法对样品进行分析,考察不同载体对催化剂甲烷裂解制氢和纳米碳材料的影响.实验结果发现,分子筛载体独特的孔道结构有利于金属颗粒的分散,能有效避免反应中界面效应导致的催化剂失活,可提高催化剂反应活性并延长反应寿命,也显著提高了其碳产率.其中以IM-5分子筛为载体的催化剂表现最佳,在反应温度为700℃时, NiCu/IM-5催化剂甲烷转化率高达80%,氢气选择性达100%,反应400 min后活性未见明显降低. NiCu/IM-5催化剂碳产率高达1 446 g_C/g_cat,是NiCu/SiO₂催化剂的5.7倍, NiCu/γ-Al     

离子液体修饰对Cu/USY催化乙炔氢氯化反应性能的影响

为了提高Cu/USY催化剂在乙炔氢氯化反应中的催化活性,设计并成功制备了一系列离子液体修饰的分子筛负载的铜基催化剂(Cu@TPPB/USY).当铜和TPPB的百分含量均为15时,在反应温度为160℃,乙炔气体空速为120 h-1,氯化氢与乙炔的摩尔比为1.25:1的条件下,催化剂的乙炔转化率提升了1.17倍,氯乙烯选择性一直保持在98%以上.结合催化剂的傅里叶红外(FT-IR)、 N2物理吸脱附(BET)、热重分析(TG)、 X射线光电子能谱(XPS)、透射电镜(TEM)、 X射线衍射(XRD)、氢气程序升温还原(H2-TPR)和等离子体发射光谱(ICP-OES)的表征,认为TPPB的修饰不仅可以促进催化剂中Cu物种的分散,抑制其还原和流失,还能减少催化剂表面积碳、增强Cu活性物种与载体间的相互作用力,有效地提高Cu/USY催化剂的催化活性.     

Turn-on Circularly Polarized Luminescence in Chiral Indium Chlorides by 5s2 Metal Centers

Introducing chirality into the metal-halide hybrids has enabled many emerging properties including chiroptical activity, spin-dependent transport, and ferroelectricity. However, most of the chiral metal-halide hybrids to date are non-emissive, and the underlying mechanism remains elusive. Here, we show a new strategy to turn on the circularly polarized luminescence (CPL) in chiral metal-halide hybrids. We demonstrate that alloying Sb³⁺ into chiral indium-chloride hybrids dramatically increases the photoluminescence quantum yield in two new series of chiral indium-antimony chlorides. These materials exhibit strong CPL signals with tunable energy and a high dissymmetry factor up to 1.5×10⁻². Mechanistic studies reveal that the emission originates from the self-trapped excitons centered in 5s² Sb³⁺. Moreover, near-ultraviolet pumped white light is demonstrated with a polarization up to 6.0 %. Our work demonstrates new strategies towards highly luminescent chiral metal-halide hybrids.     

Rich-defect carbon nanotubes for highly sensitive detection of Dopamine

Dopamine (DA) plays an essential role in the central nervous, renal, hormonal and cardiovascular systems. Various modified carbon nanotubes (CNT)-based dopamine sensors have been reported, but inexpensive, highly sensitive plain CNT-based ones are seldom studied. In this work, a facile and inexpensive CNT-based DA sensor is made by rich-defect multi-walled carbon nanotubes (RD-CNT) via an ultrasound method. The defect and elemental states of the RD-CNT are systematically studied by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), Raman spectroscopy, X-ray powder diffraction (XRD) and X-ray-photoelectron spectroscopy (XPS). Results show that massive holes and cracks exist in RD-CNT. The level of defects increases from the additional exposed edges. The electrochemical characterizations indicate that the electrochemical sensor has the highest sensitivity of 438.4 μA/(μM ⋅ cm²) among all carbon materials-based DA sensors while well meeting the clinically required detection range and selectivity. The DA sensor was further used to detect live healthy human serum and live PC12 cells with satisfactory results, thus holding great promise for an inexpensive but sensitive DA sensor in practical applications of clinical diagnosis and biological research.     

A Gel Polymer Electrolyte with 2D Filler-reinforced for Dendrite Suppression Li-Ion Batteries

Gel polymer electrolytes (GPEs) incorporate both the high ionic conductivity of organic liquid electrolyte and the high safety performance of all-solid-state electrolytes (ASSEs), greatly improving the electrochemical performance of solid polymer electrolytes (SPEs). However, the practical application of GPEs is still limited by inferior interface compatibility, lithium dendrites, etc. Herein, we prepared GPEs based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) further co-blended the two-dimensional sheet inorganic filler hectorite and poly(methyl methacrylate) (PMMA) to improve the mechanical and electrochemical properties of the GPEs. When the content of PMMA and hectorite is optimal, this GPEs have an ionic conductivity of 1.06×10⁻³ S cm⁻¹ and outstanding lithium symmetric cells cycle time of more than 3000 h, indicating that the introduction of filler effectively inhibits the growth of lithium dendrites at room temperature. Moreover, the GPEs adopt a relatively simple solution casting method to provide a fresh idea for the synthesis of high-performance GPEs.     

Stepwise Engineering the Pore Aperture of a Cage-like MOF for the Efficient Separation of Isomeric C4 Paraffins under Humid Conditions

The separation of isomeric C4 paraffins is an important task in the petrochemical industry, while current adsorbents undergo a trade-off relationship between selectivity and adsorption capacity. In this work, the pore aperture of a cage-like Zn-bzc (bzc=pyrazole-4-carboxylic acid) is tuned by the stepwise installation methyl groups on its narrow aperture to achieve both molecular-sieving separation and high n-C₄H₁₀ uptake. Notably, the resulting Zn-bzc-2CH₃ (bzc-2CH₃=3,5-dimethylpyrazole-4-carboxylic acid) can sensitively capture n-C₄H₁₀ and exclude iso-C₄H₁₀, affording molecular-sieving for n-C₄H₁₀/iso-C₄H₁₀ separation and high n-C₄H₁₀ adsorption capacity (54.3 cm³ g⁻¹). Breakthrough tests prove n-C₄H₁₀/iso-C₄H₁₀ can be efficiently separated and high-purity iso-C₄H₁₀ (99.99 %) can be collected. Importantly, the hydrophobic microenvironment created by the introduced methyl groups greatly improves the stability of Zn-bzc and significantly eliminates the negative effect of water vapor on gas separation under humid conditions, indicating Zn-bzc-2CH₃ is a new benchmark adsorbent for n-C₄H₁₀/iso-C₄H₁₀ separation.     

Tuning the CO2 Hydrogenation Selectivity of Rhodium Single-Atom Catalysts on Zirconium Dioxide with Alkali Ions

Tuning the coordination environments of metal single atoms (M₁) in single-atom catalysts has shown large impacts on catalytic activity and stability but often barely on selectivity in thermocatalysis. Here, we report that simultaneously regulating both Rh₁ atoms and ZrO₂ support with alkali ions (e.g., Na) enables efficient switching of the reaction products from nearly 100 % CH₄ to above 99 % CO in CO₂ hydrogenation in a wide temperature range (240–440 °C) along with a record high activity of 9.4 mol_CO g_Rh⁻¹ h⁻¹ at 300 °C and long-term stability. In situ spectroscopic characterization and theoretical calculations unveil that alkali ions on ZrO₂ change the surface intermediate from formate to carboxy species during CO₂ activation, thus leading to exclusive CO formation. Meanwhile, alkali ions also reinforce the electronic Rh₁-support interactions, endowing the Rh₁ atoms more electron deficient, which improves the stability against sintering and inhibits deep hydrogenation of CO to CH₄.     

MALDI Imaging Assisted Discovery of a Di-O-glycosyltransferase from Platycodon grandiflorum Root

A matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI) assisted genome mining strategy was developed for the discovery of glycosyltransferase (GT) from the root of Platycodon grandiflorum. A di-O-glycosyltransferase PgGT1 was discovered and characterized that is capable of catalyzing platycoside E (PE) synthesis through the attachment of two β-1,6-linked glucosyl residues sequentially to the glucosyl residue at the C3 position of platycodin D (PD). Although UDP-glucose is the preferred sugar donor for PgGT1, it could also utilize UDP-xylose and UDP-N-acetylglucosamine as weak donors. Residues S273, E274, and H350 played important roles in stabilizing the glucose donor and positioning the glucose in the optimal orientation for the glycosylation reaction. This study clarified two key steps involved in the biosynthetic pathway of PE and could greatly contribute to improving its industrial biotransformation.     

Alloying-Triggered Phase Engineering of NiFe System via Laser-Assisted Al Incorporation for Full Water Splitting

It is challenging to design one non-noble material with balanced bifunctional performance for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for commercial sustainability at a low cost since the different electrocatalytic mechanisms are not easily matchable for each other. Herein, a self-standing hybrid system Ni₁₈Fe₁₂Al₇₀, consisting of Ni₂Al₃ and Ni₃Fe phases, was constructed by laser-assisted aluminum (Al) incorporation towards full water splitting. It was found that the incorporation of Al could effectively tune the morphologies, compositions and phases. The results indicate that Ni₁₈Fe₁₂Al₇₀ delivers an extremely low overpotential to trigger both HER (η₁₀₀=188 mV) and OER (η₁₀₀=345 mV) processes and maintains a stable overpotential for 100 h, comparable to state-of-the-art electrocatalysts. The synergistic effect of Ni₂Al₃ and Ni₃Fe alloys on the HER process is confirmed based on theoretical calculation.     

Electronic Perturbation of Copper Single-Atom CO2 Reduction Catalysts in a Molecular Way

Fine-tuning electronic structures of single-atom catalysts (SACs) plays a crucial role in harnessing their catalytic activities, yet challenges remain at a molecular scale in a controlled fashion. By tailoring the structure of graphdiyne (GDY) with electron-withdrawing/-donating groups, we show herein the electronic perturbation of Cu single-atom CO₂ reduction catalysts in a molecular way. The elaborately introduced functional groups (−F, −H and −OMe) can regulate the valance state of Cu^δ+, which is found to be directly scaled with the selectivity of the electrochemical CO₂-to-CH₄ conversion. An optimum CH₄ Faradaic efficiency of 72.3 % was achieved over the Cu SAC on the F-substituted GDY. In situ spectroscopic studies and theoretical calculations revealed that the positive Cu^δ+ centers adjusted by the electron-withdrawing group decrease the pK_a of adsorbed H₂O, promoting the hydrogenation of intermediates toward the CH₄ production. Our strategy paves the way for precise electronic perturbation of SACs toward efficient electrocatalysis.